BunnyKiller
BunnyKiller
@bunnykiller
Eminent Member
Joined: 2020-03-14 9:15 pm
Last seen: 2021-08-24 7:16 am
Topics: 6 / Replies: 22
Topic
Replies: 1
Views: 789
Reply
RE: ESP32 CAM MB sister board

@davee what gave me the idea that it was a diode was the color, black, with a line printed on it as most diodes have and a code of SL. When the "item"...

1 year ago
Topic
Replies: 5
Views: 1275
Reply
RE: Switch AC motors on and off with Arduino

salvage the relays off of the board. 99% of the time, A/C relays are DC relays with diodes in them to change the A/C to D/C. It all sounds feesible, j...

2 years ago
Reply
RE: Am I overstressing my Arduino with 6 5050 RGB Leds and a length of EL wire?

I would go for an external power supply, 6@50/50 is pressing the current a tad.

2 years ago
Forum
Reply
RE: $ store flashlight to laser

3D laser printing is a slow and tedious process, especially when you are doing it in a manufacturing enviroment.

2 years ago
Forum
Reply
RE: bench power supply from pc power supply

@zoolandermicro I would go with the 6/2 switch. You can double up on the contacts per volt line to handle the amps and by having 6 position you can ...

2 years ago
Reply
RE: bench power supply from pc power supply

@zoolandermicro Ive got about 5 of these in use, the 0-100 voltage is the supply power going into the meter from your supply, the 4-30 supplies power ...

2 years ago
Reply
RE: Streaming mike screen

@dronebot-workshop method 1 is possible. video card is a 2080 Ti. I have about 3 different mini screens, 1 of them being the control panel for the rev...

2 years ago
Topic
Replies: 4
Views: 405
Reply
RE: What to do during lockdown??

my stay at home time has been dealing with upgrading a 3D printer, new frame, new board, new screen, new drivers, new low friction travel, the additio...

3 years ago
Reply
RE: What to do during lockdown??

Ive been ordering from amazon lately and even tho they are giving a 6-10 week lead time, Im still seeing things come in within 1-2.5 weeks from China....

3 years ago
Reply
RE: Got Jumper wires?

the ones I find problematic are the version with the round molded plastic ends, the pins are too thin and wont stay in the "real" Dupont wires ( squar...

3 years ago
Reply
RE: 18650 Battery Fairytales

what I like to do with the 4 slot holders is use the 2 outside slots to hold the batteries and the 2 inside slots to hold a 3.3/5vdc regulator, that w...

3 years ago
Reply
RE: 18650 Battery Fairytales

how extensive is the set up as far as series paralell modules?... if you need some quick and dirty battery holders, Amazon has several variations 1,2...

3 years ago
Page 1 / 2