Last seen: 2023-05-29 8:46 pm
hmmm lets see... an ESP32 requires an input signal to the ADC, preferably analog such as a sinewave or music etc. My computer has a sound card in it ...
Well its been quite a while and found my answer, the part that poofed was a diode and I replaced it with a 4007 and it lives... Loaded up the code and...
@davee what gave me the idea that it was a diode was the color, black, with a line printed on it as most diodes have and a code of SL. When the "item"...
salvage the relays off of the board. 99% of the time, A/C relays are DC relays with diodes in them to change the A/C to D/C. It all sounds feesible, j...
I would go for an external power supply, 6@50/50 is pressing the current a tad.
3D laser printing is a slow and tedious process, especially when you are doing it in a manufacturing enviroment.
@zoolandermicro I would go with the 6/2 switch. You can double up on the contacts per volt line to handle the amps and by having 6 position you can ...
@zoolandermicro Ive got about 5 of these in use, the 0-100 voltage is the supply power going into the meter from your supply, the 4-30 supplies power ...
@dronebot-workshop method 1 is possible. video card is a 2080 Ti. I have about 3 different mini screens, 1 of them being the control panel for the rev...
my stay at home time has been dealing with upgrading a 3D printer, new frame, new board, new screen, new drivers, new low friction travel, the additio...
Ive been ordering from amazon lately and even tho they are giving a 6-10 week lead time, Im still seeing things come in within 1-2.5 weeks from China....
the ones I find problematic are the version with the round molded plastic ends, the pins are too thin and wont stay in the "real" Dupont wires ( squar...
what I like to do with the 4 slot holders is use the 2 outside slots to hold the batteries and the 2 inside slots to hold a 3.3/5vdc regulator, that w...
how extensive is the set up as far as series paralell modules?... if you need some quick and dirty battery holders, Amazon has several variations 1,2...
I also have been trying to find/build a low volt hi current supply for laser diodes and hi power leds. Ive tried a couple of motor controller that wer...