@thrandell Thanks for your reply. That's a good point about need for a PWM signal, and yes, I am willing to do that. My current sketch does it that w...

Regarding the time to first fix, I should qualify my remarks. If the device goes through the long process of getting the almanac - and then stores tha...

@will @magic-smoke I would second that comment about the Stuarts Project article on GitHub. I've only gone through it once, but it is very well writt...

That's a good idea. I tried it, and think it will work for what I want, not super stiff, but enough to take care of the "wiggle." In fact, I just used...

Hey Andrew, welcome! There's a lot of depth, i.e. a lot you can do with Arduinos. I tend to prefer the Arduino Nano myself, very inexpensive, compact,...

After further testing with the long, straight wire antenna, I was able to get about 25 meters range. This was through two walls, then outdoors to a sp...

@will OK, updating my earlier status. The little bare copper coils are miserable as antennas. I did stretch one out as far as I could; it was more t...

@will Thanks, Will. Don't know how I missed that one, but I will check it out.

@bunnykiller - I also have purchased a couple of ESP32-CAM modules with that separate small board. Mine have not farted, exploded or otherwise misbeha...

@codecage Yes, that is a valuable thing to point out. I have definitely been down that road, that is, wondering how to choose the right processor set...

Thanks for that insight, and thanks for your considered reply. I have conventional WiFi as well, plus a couple of old routers devoted as "bridge" devi...