I've seen videos of guys building circuits with perfboard and when they show you the bottom of the board they have these long lines of solder that are...

@inst-tech Wow, that's the best datasheet I've seen for this module. Thanks.

Thanks everyone for all the comments and suggestions. I've ordered some 1.25 from Amazon and I'll study that website closer. The connector is for a ...

This might be a more useful photo of the one I'm looking for.

Did this video ever get made? If so what was it called? I'd love this.

@zander There is the backside. I'll hook it up to the computer and see if it's receiving anything but I thought I'd need the screw on antenna.

@zander here is the picture of what I received. And yes I've watched Bill's video a couple of times. I've also been playing with a Beitien 880 ...

The board to the lower left says, Ver:1.1 at the top and at the bottom it says, SSOP4-28Pin 0.65MM. The board pictured above that one says, SOP20Pin...

@zander Hi there; I managed to get it all working. At line 108 there is a delay(). It seemed to be that area where the sketch was failing. So I comme...

@zander Thankyou very much for your attention to this. I appreciate it very much. The duplicate 'include' is a mistake that I thought I had fixed. ...

Here is the script with the magnetometer code added in. I believe I used Bill's magnetometer code. Everything up to about line 112 works then not...

Here's my working GPS it displays the time, lat, long and altitude on a 4 line lcd #include <Wire.h> #include <LiquidCrystal_I2C.h> ...

I went and bought a BN880 and I’m wondering if it’s possible to run both the magnetometer and the gps at the same time. I’ve got a working gps sketch ...

@davee Thanks everyone for the fast responses. Found this USB-C version which apparently has overcharging/undercharging protections. ZQ100WT 5pcs T...

@zander Thanks for the quick reply. I work as a computer tech for a community college. I've had to tell several people that their laptops have becom...