UPDATE : I sent an email to Cytron to see if they had any answers, but, it seems that they are focused on the Raspberry Pi for this board... HOWEV...

@robo-pi Be careful. I discovered the hard way that designing the chassis and then trying to fit all the components in afterward is a bad idea, unle...

@franktbrady I usually see the Raspberry Pi as a solution to most problems, well, that and my 3D printer... and a hammer I bought a few of these f...

@robo-pi I toyed with, and am still dreaming about installing voice command/control/interaction on at least one of my bots, but due to my interactio...

@robo-pi I wish I had seen this sooner Prayers and best wishes my friend PLEASE get well soon !

@yurkshirelad Have you tried recopying the SSD again without playing with the OS while the copy is going ? It may not matter, but it seems reasona...

Update on the helmet... The angles (using the current lengths of the arms) turned out to be 120 and 45, which would obviously change if I alter the ...

@yurkshirelad Bill might have a better answer, but, from my experience, I've found that it's not specifically Amazon that's the problem, it's the bo...

@robotbuilder That code works PERFECTLY ! No stuttering or hesitation at all Thank You ! I'm still playing with the hinge angles and locations...

I do slightly better (slightly) with python, that's why my robots use Pi's and Jetsons rather than arduinos Hardware is easier to manipulate to my n...

Yes. The first video was to show what I had already gotten done. That the lights work, and I think they look pretty snazzy. Sorry for the confusion ...

@frogandtoad @robotbuilder Preliminary testing with only one servo (cuz you mentioned it might help) Had to modify a few mounts and use a bigger...

Thanks Bill ! I really like the idea of having only one IDE to be completely confused by rather than a dozen

@frogandtoad Adding the #define interrupts to the 2nd code seems to have made a world of difference ! I tried tweaking the debounce, and it's not ...