To use the 'normal' IDE is akin to a sharp knife. Yes it is sharper, but that means you can bleed. Unless you are willing to destroy yopur project, do...

@microhead Ah, my mistake. I thought it was the device. No nothing like that changed. I am going to do some screen shots so maybe you can then see wha...

@whitneydesignlabs The replacement battery packs will have to connect via the USB connector, NOT the 5V pin. I thought you knew that. I originally t...

@whitneydesignlabs Remember, this is for NON Lan use, while VNC is only LAN.

@whitneydesignlabs I don't understand why you think there is some mystery re the Pi5 power. If you are going with battery power then just match the ou...

Either power on or pushing the reset switch if already running will re-initiate the sketch. It will run the procedure called 'startup' first , then if...

@kontrol77x The board is easier to find using the IDE2 board search tool. Here is a sc reen grab.

What is the 'Elyn' in that name, it should just be ESP32S3 Dev Module.

@chris-rice Welcome to the forum Chris.

@microhead Ok, I just tried it and noticed something. See the attached pics. In pic1 the device is offline then in the 2nd pic, I can tell it is Onlin...

@microhead You tried the upload from the web editor? My board also showed offline until I did the upload. It took a couple tries and I think I clicked...

@microhead Is the cloud agent running in the background? Were you able to create the secret key etc? It did take a while to see mine go online, I ...

@microhead It took some fiddling, but I eventually got it to work. Make sure thge CloudAgent is running on your PC. Make sure the USB cable is...

@microhead Could you re-post this in one of the other forums, this is the introduction forum. We don't have an IoT forum, so maybe Project Corner foru...

@civil I just noticed that you have posted your new topic at the end of somebody elses old topic. Maybe Bill (@dronebot-workshop) can move this elsewh...