Sounds like good advice to me.  Thanks

I have a usb hard drive with some data on it that I don't want to lose.  Can I create a partition to use for a swap space on the Pi3+?

Yes

Posted by: @starnovice

Suggestions on how?

Buy a $10 thumb drive

Seriously. I've looked into this in the past, and decided that I'm not confident enough in my own skills to pull off something like this on a drive with data that I don't want to lose. My best suggestion is to go to the store, buy a thumb drive, and use that, because the downside of making a single mistake in a process that I've never actually even TRIED (because I was afraid to) means that you lose your data. 

Let's do a cost benefit analysis...

You say you don't want to lose your data, which means it's irreplaceable, making the cost of the data beyond monetary value

Whereas the benefit is that you save $10 and a trip to the store

I've done things like this on new drives, where there was no fear of lost data, but, never on a live drive

I have a usb hard drive with some data on it that I don't want to lose.  Can I create a partition to use for a swap space on the Pi3+?  Suggestions on how?

That is a good idea about the swap space, I will have to do that and try again.

I ran into the same problem with both ros and tensorfow (before they made it simple) my solution to that was to install an 8g usb thumb drive and assign the whole thing as swap. It worked after that

The os for the pi4 is newly refabbed, and i dont know if it's campatible yet. I haven't tried it yet, too many detours

I'm wondering if you can't compile a ros image for the Pi4.  I could get it to work on a Pi3+ but I think I ran out of memory and it hung up.

The only caveat I'd like to add so far is that you can't install arduino from apt-get. I mean, you can, but, it's gonna be an old version that doesn't work well. Lots of buttons left out. You need to install the latest (that I found) version, which is "arduino-1.8.9-linuxarm.tar.xz", and then, don't follow the instructions for installing

"arduino-linux-setup.sh" didn't work on the Pi, it might be for regular linux, I just used "install.sh" and that worked fine

Oh, and get the 32 bit. 

I got the Pi3 and the Pi4 working with the arduino. I haven't tried the Jetson yet

On the Pi4, when I plugged it in, the USB picked it up nicely

463

And it labeled the port for the arduino without a problem

464arduinoloaded

And the IDE picked it up and labeled it with all the info which my windows machine seems rather disinclined to do

465

Haven't tried the ROS yet on the Pi4 tho. All the images I have for ROS are for the Pi3

The ROS tutorial on this is really quite straight forward and should not be feared.  It is even a good project if you only have a short amount of time.  The main issue is that ROS uses what is called rosserial to be able to talk to the Arduino that does not have an Ethernet hat.  (For an Ethernet hat here is a link to a code sample: Ethernet Arduino . I don't have a hat so can't try it.)

The commands to get you up and running are first installing the rosserial and the rosseerial-arduino (I have melodic Ros so if you have different version change the version name to match):

sudo apt-get install ros-melodic-rosserial-arduino
sudo apt-get install ros-melodic-rosserial

The you change directory to the Arduino IDE sketchbook/libraries, make sure you don't have an old version of the library, then build the arduino library (don't miss the period at the end of the command the means you want to build it in this directory.  That kept me scratching my head, no wonder I don't have any hair.)

cd <sketchbook>/libraries
rm -rf ros_lib
rosrun rosserial_arduino make_libraries.py .

The useful thing is once you have this library build you can copy it to your Windows version of IDE and use it there.  So you can program the Arduino now from either the Linux system or the Windows system.

Once you have it installed go to the IDE's example menu (be sure you restart the IDE after building the library)  and you will see several examples to use.  They are documented here: http://wiki.ros.org/rosserial_arduino/Tutorials

Have fun.

    So you do what you would normally do and google the error message, and maybe you even google "serial port grayed out".  You will find lots of answers to both of these responses, most of them telling you to set your permissions, run IDE as root, edit the preferences.txt file, and that the problem has been fixed in some earlier release of Linux.  Trust me none of this solves your problem.

    So you try to reinstall Java, after all this is a Jave error message, and still no joy in Mudville. So what is the secret?  I'll tell you in case you need to fix your version or you want to break your version.

    The problem is the Arduino IDE is expecting Java 8 and does not work with at least Java 10.  So to see what version of java you have installed run: "sudo update-alternatives --get-selections | grep java".  Then to set the correct version of java run "sudo update-alternatives --config java".  This will let you select between the various versions of java. I mean come on guys, it is supposed to be backward compatible.

    I would also like to know how I got more than one version of java on the machine to begin with.  I'm sure this is user error but I don't know what I did.

Well good luck, more on actually getting the Arduino to communicate in the next article.

Pat Wicker

PERFECT !

That's exactly what I've been trying (and failing miserably) to do, in exactly the same order

Please, lay on MacDuff