I have ordered an adjustable power supply board that says it's rated at 5Amps. I hope that's enough to get this little guy walking. Not trying to do...

The Smraza Micro Servo S51 180deg angle rotation's limited data sheet says, operating voltage 4.8Vrunning current 90mA peak stall current 750mA s...

Thanks @davee for more important points I had overlooked. The 1.2 volt drop was at a 50% duty cycle of normal operation of the LED segments. When...

thanks @davee I had not looked at that current, thanks for your concern. Not running at full brightness, I am getting 1.20 volts across each 3...

From my software experiments on the re-wired seven segments I have come to the conclusion that I will need to add a Timer Interrupt Service Routine th...

Thanks, re-wired done, but not yet documented in the schematic. now that the seven individual segments light how do light both digits? Next is...

not good news, but thanks Will. At least there are pins that can be used. Now it will be a test of my ability to re-wire the schematic and solder ...

Thanks Will, I have a seven segment issue on a Simon game powered by a Nano. I'll post the details in a better thread.