It's on my iMac, I didn't want to go through Parallels, if at all possible. I think @Dronebot-workshop tried it on Windows & Linux. This is my Too...

Here's the output; Sketch uses 480133 bytes (36%) of program storage space. Maximum is 1310720 bytes.Global variables use 23944 bytes (7%) of dynami...

@Dronebot-workshop I downloaded the usb-UART driver from Silicon Labs Restarted the mac, then wound back the ESP32 by Espressif to 2.0.11 Chang...

@dronebot-workshop Thank you Bill, I'm confused with all this. I have the latest Parallels, for times when I need Windows 11, so I will try that f...

Hi, I have to confess, this is the first esp32 project I've worked with. When you say you changed the PSRAM, how do I do this? You also mentioned that...

@inq Thnx for that, I learnt two things today, 1/ I learnt that if you had your adblocker on, you can't find the solved check box, & 2/ It tak...

Hi @inq, My bad, I didn't realize I had to mark this as solved! It is solved now, though everything you mentioned WAS a problem. I had to go to 80...

@will Sorry, your reply must have come in whilst i was writing my reply. As to your points. 1/ Yes, the platter will have a magnet inserted in it(...

@will Thanks! Yes, i have tested the pairs, & strangely, they are correct. :) This makes more sense, I've used 2 for STEP & 3 for DIR. The...

Hi @Will and @binaryrhyme Hi guys, Replying to BR first; !/ My designed circuit is not in use, just using my breadboard.2/ My cro detects PWM ...

@will am I missing something? I installed accelstepper, & then tried 'ConstantSpeed.pde' since it seemed the easiest to try first. The minimal c...

@will & @binaryrhyme Thank you both. Seems my Fusion 360 prowess is better than my stepper motor knowledge. The article Bill wrote, said that ju...

@Dronebot-Workshop (Bill) I picked up a USB C to USB Micro cable yesterday (the only one they had was 8" long, so now it dangles from the rear of my...

@dronebot-workshop (Bill) I've done as you suggested, & hooked up one of my Arduino boards, & as you foreshadowed, it works perfectly. W...

@Byron Thank you so much for that. I'd never had a problem on my previous Macbook pro, running Arduino's of all types. & had not even considered...