Last seen: 2022-06-26 12:42 am
@zander Thank you for the advice, the issue has been resolved.
@zander I will clarify? I do not see an answer on how to accesses files on an SD card that is mounted to the AI Thinker ESP32CAM. I am not using the S...
@zander @frogandtoad | Sweet, thank you guys for all the information, very helpful! I am using an SD card to store the files, I'm new to browsing docu...
@zander So i have been doing a bit of research. To clarify the problem I have used the code from the dronebotworkshop but have been getting results li...
@zander Thank you so much for the help! I was able to find a library that worked out and get a button working. Thanks!
@zander Does the wiring setup look okay if I'm using the internal pull resistor?
@zander So here is the code I have for the debounce and the button just activating the flash. The flash flickers in setup to verify it is working but ...
@zander Ah I see, so why does the article from dronebot not setup the button as in digital Input but it still seems to work fine?
@yurkshirelad Right now I have a button hooked up to according to the push button diagram in the link below. I'm not sure what debouncing is but I hav...
@zander Im not using any libraries. Just setting GPIO Pin 13 to an input and I am not able to get any values when I digitalRead 13.
@zander Okay. Overall I understand how to use a button on a normal Arduino for example. But it seems using it on the ESP32CAM is very different to use...