Last seen: 2022-06-26 12:42 am
@zander While neither of us know exactly what the problem could have been, and after playing with my code and experimenting with other working sketche...
Changing the Clock Freq, Frame_size, jpeg_quality, and WB_Mode.
@zander Ah ha! I figured it out! I have attached the final good image taken by the code that was stored on the SD card. Here are the changes I mad...
@zander The 'good' photo that I took was using the Example WebCamServer with the ESP32-CAM. I right clicked and saved the image directly from the webs...
@zander It definitely seems something to do with the camera not having enough time to adjust settings for a picture. I finally got something working. ...
@zander I have spent the morning trying to implement the code that the WebCamServer uses into my own that stores it to the SD card but with no luck, t...
Something more to add, however this may be another question in itself. I swapped SD cards to see if that was the problem. I went from the cheap black ...
@zander Sweet, thank you
175Kb for the bad one and 146Kb for the good one.
and PIXFORMAT_JPEG
@zander Here are the photos
Whats more is that when I take a photo using the WebExample it turns out perfect.
@zander It may be because of the flash? It does seem that the flash on that sketch is a bit ineffective. Do you happen to have a sketch where the flas...
@zander No this is the Dronebot workshop MicroSD card sketch.
@zander changed from an LED strip to Incandescent light bulb (attached), no change.