Last seen: 2022-03-14 11:23 pm
@dkc1959 Hello, The only issue I remember having with them (It's been awhile) was it depended on what one you turned on first in or...
One look at it sitting in the leaves and all I could think of is a turret with a leaf blower mounted on it. It would certainly surprise the dog and sq...
Farzad, You might want to check out toptechboy.com, Paul has put together a tutorial on Python starting with the install Here. Hope this hel...
@magnusmagpie I assumed you were working with Bill's server sketch before when I suggested you add RH_NRF24 (8, 53); to line 23 below the RH_NRF24 Ra...
@magnusmagpie I would use the first one above the void setup(). Make sure you un-comment out the line, just remove the // in front of the RH-NRF24 (8,...
@magnusmagpie Don't feel alone , my coding is abysmal at best but my attempt at it would be on Bill's server sketch line 23 I would add RH_NRF24 (8, ...
@expatty To expand on this a little more, If you install the Sparkfun VL53L1x 4m Laser distance sensor in your Arduino IDE library you can then go t...
Hello, I'm not familiar with the Mega but glancing over the tutorial I see it uses different SPI pins then the UNO uses. Also on the nrf24_server sket...
Hello Sid, As a low time member myself let me say welcome aboard. What I have found from Bill on down the members have been most generous with their ...
@expatty I haven't worked with the TOF400f either but looking at the data sheet it shows it is based on the VL53L1 chipset. Looking at the Arduino ID...
@bruno Are you using the adapter with the nRF24L01+ and feeding it 5v from the Arduino? If so do you have a way to check the voltage output on the Ar...
Bruno, In my Arduino IDE if I do a search of RadioHead in the Manage Libraries it will not show up , but it does show up in examples in the file sec...
@cenlasoft Curtis , I had the same problem with the first one I ordered from Amazon and thought it was a dud so I ordered another from a different ven...
@davejs Bill let me know it is possible to change picture orientation in the software, I haven't tried it out yet but here is the conversation from hi...
@geoff666 Geoff, I am using the nRF24L01+ on an Elegoo Smart Car 3.0 with separate power for the car and nRF24L01. After powering everything up I stil...