Notifications
Clear all
Topic starter
2021-09-29 1:04 am
I have been trying to locate pref boards like the one used for the Power Distribution Board. Does anyone have a supplier or link to them?
Thanks in advance.
2021-09-29 10:14 am
I think I can find the link to the ones I found on Amazon, I'll take a look and post again when I locate them. I also designed my own in KiCad and had the minimum made. If you might be interested in one of those let me know. Another member, @huckohio, designed one as well but don't know if he has any left. He should see this post though since I used the @ symbol before his user name.
SteveG
Topic starter
2021-09-29 12:07 pm
Thank you.
2021-09-29 12:22 pm
Hello,
Looks nice to hear about Power distribution. I will love to make this as my second project. These days working on Voltage and Current measurement.
I request you to share the details, circuit diagram of this project.
Thank you
Warm regards
Pradeep Kumar
Mob-7303-375-375
WhatsApp-7880-375-375
2021-09-29 8:27 pm
@codecage What does a power distribution board look like and what are you using it for?
Topic starter
2021-09-29 9:07 pm
The Power Board that is shown in the video. Looking for the pref boards used. I do not like the ones that I have been able to find.
2021-09-29 9:21 pm
The Power Board that is shown in the video.
DBWS has already published more than 100 videos.
Experience is what you get when you don't get what you want.
Topic starter
2021-09-29 9:33 pm
It is first shown in the DB! video 5. On the DBWS site it is shown here https://dronebotworkshop.com/real-robot-005/ .
2021-09-29 9:38 pm
Thank you.
Experience is what you get when you don't get what you want.
2021-09-29 10:44 pm
Oh, I'm sorry, he specified the power board used in DBWS video #5. I went to the URL and found the CYTRON MD10C listed as the motor controller which is the part I linked in my reply
My bad 🙂
Experience is what you get when you don't get what you want.
Topic starter
2021-09-29 11:28 pm
@codecage Getting close. The actual pref board is what I am looking for. Guess I my have to have some made.
2021-09-30 1:00 am
Try these. There should be a few similar ones at this page as well.
2021-09-30 1:02 am
This is mine. Advice: put the 5V on a separate board.
Page 1 / 2
Next