Sorry the servos are not running or responding. These are the sketches that i used 880,879 

sorry I burned my servo so I had to Arrange new servos I will tell you about my results as soon as possible

Excellent!

Posted by: @frogandtoad

Anyway, I'm glad you got it working... do let us know exactly what you did to fix it, as others may well be experiencing similar issues.

Oh crap, looks like you posted this while I was writing :-)

Anyway, I'm glad you got it working... do let us know exactly what you did to fix it, as others may well be experiencing similar issues.

Unfortunately, I don't have any fixed times, but is could be an hour or so each way from here, when I'm not to busy to drop by.

Receiver-Code:32:31: error: void value not ignored as it ought to be

done = radio.read(msg, 1);

^

I'm not 100% sure as I have never used this, but I think based on the message the 'read' member function may have a void return, so just remove the done to start with, and then see if you get any other errors.

Cheers

I can tell you about my results.

sorry there was  a Blackout in my area Internet wasn't available for two days. So I haven't made any change in the Reciver Code but it is giving me an error like "void value is not ignored as it ought to be", While the Transmitter code is Working Fine.

Here is the error code, am i missing a library or something ?

Arduino: 1.8.10 (Windows 10), Board: "Arduino/Genuino Uno"

C:\Users\GULSHAN\AppData\Local\Temp\Rar$DIa17660.45585\Receiver-Code\Receiver-Code.ino: In function 'void loop()':

Receiver-Code:32:31: error: void value not ignored as it ought to be

done = radio.read(msg, 1);

^

Multiple libraries were found for "Servo.h"
Used: C:\Program
Not used: C:\Users\GULSHAN\Documents\Arduino\libraries\Servo-master
Multiple libraries were found for "SPI.h"
Used: C:\Program
Multiple libraries were found for "RF24.h"
Used: C:\Users\GULSHAN\Documents\Arduino\libraries\RF24-master
exit status 1
void value not ignored as it ought to be

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

I used #define to give you a visual representation of how array elements and their indexes relate to one another... you are free to use the #define macro or a const integer variable if you wish.  As far as your current code goes, does it work? If not, what are the error messages and what is it not doing that you expect of it?

It's getting late here, so I'll have to leave you to figure out where the problem may be.

Send some print messages to the serial monitor in strategic location to confirm that the values are being sent across correctly, etc... that's a good way to debug your code.

Cheers!

You mean rather than using "int msg1" I can use the "#define" to define them Seperately?

and how about the receiver code is it OK ?

/*
---- Receiver Code ----
Mert Arduino Tutorial & Projects (YouTube)
Please Subscribe for Support
*/

#include <Servo.h> //the library which helps us to control the servo motor
#include <SPI.h> //the communication interface with the modem
#include "RF24.h" //the library which helps us to control the radio modem

Servo myServo;
Servo myServo1;
Servo myServo2;
Servo myServo3;
Servo myServo4;//define the servo name

RF24 radio(8,10); /*This object represents a modem connected to the Arduino.
Arguments 5 and 10 are a digital pin numbers to which signals
CE and CSN are connected.*/

const uint64_t pipe = 0xE8E8F0F0E1LL; //the address of the modem,that will receive data from the Arduino.

int msg1;

void setup(){
myServo.attach(2); //3 is a digital pin to which servo signal connected.
myServo1.attach(3);
myServo2.attach(4);
myServo3.attach(5);
myServo4.attach(6);

radio.begin(); //it activates the modem.
radio.openReadingPipe(5, pipe); //determines the address of our modem which receive data.
radio.startListening(); //enable receiving data via modem
}

void loop(){
if(radio.available()){ //checks whether any data have arrived at the address of the modem
bool done = false; //returns a “true” value if we received some data, or “false” if no data.
while (!done) {
done = radio.read(msg, 5);
myServo.write(msg1);
myServo1.write(msg1);
myServo2.write(msg1);
myServo3.write(msg1);
myServo4.write(msg1);

}
}
}